Alsey Smithfield Air-Set Refractory Fireplace Mortar--Medium Duty

Alsey Smithfield Air-Set Refractory Fireplace Mortar--Medium Duty

Wet, air-setting, medium duty 2700°F, refractory mortar formulated to be used with our Smithfield Unbranded Medium Duty Firebrick.

Application:

The material is ready-mixed; however, some liquid will come to the top and must be thoroughly mixed in before using.  If mortar is frozen, allow pail to thaw at room temperature.
   
This air-setting mortar should be tightly capped as soon as possible, as it will begin setting up once in contact with air.

We recommend a 1/16” to 1/8” joint when laying up firebrick. Approximately 35 to 40lbs. of mortar will lay up one hundred 9x4½x2½" straights (depending on the thickness of the joint).

Typical set time is between 48 and 72 hours; however, set times can be as long as a few weeks, especially in situations where construction occurs during cooler temperatures with high humidity levels. These conditions could cause the surface of the mortar to harden while the mortar within the joint will stay workable. Application to damp brick will also slow the set time. Once all moisture has evaporated, the mortar will finish setting up.  Mortar must be completely dry before applying heat.

Cautions:

Do not use in outside installations.  This mortar is water soluble and will eventually erode if exposed to rain or snow melt.

Do not use as filler for voids. Mortar will experience shrinkage and cracking if applied thicker than ¼”. If your application requires the above conditions, please consider using our Alsey Flue-Set Non-Water Soluble Refractory Mortar.

Product Details

Inventory Number Product Description Size Pallet Count
2A1025 SMITHFIELD Air-Set Fireplace Mortar 15 lb. pail
(4 per case)
30 cases
2A1050 SMITHFIELD Air-Set Fireplace Mortar 50 lb. pail 48 each
2A1120 SMITHFIELD Air-Set Fireplace Mortar 10 oz. caulk tube
(12 per case)
60 cases